DX-2200 SD/HD-SDI Text & Graphics Inserter Product Firmware

Download DX-2200-TI-24 Firmware Version 1.91 →

Released: September 10, 2019

Introduction

This firmware update is for the Microtronix DX-2200-TI-xx SD/HD-SDI Text & Graphics Overlay Inserter product, Model Part Numbers: DX-2200-TI-14 and DX-2200-TI-24.

The firmware is supplied through our secure FTP site as a zipped file which must be uncompressed and then installed on DX-2200 product through the Microtronix RS-232 Serial port using a Uploader Program (available on our website under the Resources tab here). An included readme.txt file provides information on extracting the file to a PC and installing the new firmware on the product.

If you have an issue in installing the firmware, installation support is available from Microtronix. For further information visit www.microtronix.com/support or email Technical Support: support@microtronix.com.

Firmware Revision History

 Version 1.90, Issued: Aug. 21, 2019

• Added alpha keying for the PIP input. See § 4.8.1.8 of User Manual
• Add RO command to report output mode. See Table 23 of the User Manual.
• Add P9 command for center screen PiP position. See Table 7 of the User Manual.

Version 1.90, Issued: Aug. 21, 2019

• Added the video output format OM command.
• Added Modes 4, 5 that provide low frame delay on SDI Input 1. See § 4.5 and § 4.8.1.4 of User Manual.
  

 Version 1.80, Issued: April 16, 2019

• Added new status reporting commands as listed in Appendix C.

 Version 1.76, Issued: Aug. 16, 2019

• Correct G0Z command description to show that is clears fields on all layers.

  Version 1.75, Issued: March 21, 2018

• Updated Tahoma 18 regular font to correct a character spacing issue.

Version 1.71, Issued: Feb. 6, 2017

• Added section outlining Serial Port Communication
• Added section numbering to document layout.

Version 1.70, Issued: Nov. 13, 2017

• Modified the configuration bypass function to also bypass loading of images from flash memory.
• Improve handling of corrupted images in the flash memory.
• Fix a bug in the frame counter when using 1000/1001 frame rates.
• Add a time clock mode to the frame counter display.
• Add support for capture of NMEA 0183 GPS data from the DB9 serial port and insertion of selected parameters into text fields for display on the overlay.

Version 1.68, Issued: Aug. 23, 2017

• Added configuration bypass function.

Version 1.67, Issued: July 19, 2017

• Add an additional arrow character to the Wingding fonts at code 005F.

Version 1.00 to v1.68, Issued: Jan. 30, 2014 - Nov. 17, 2016

• Refer to revision history in the User Manual